Scupper 74


Scupper, a 1978 Legnos Mystic 30' Cutter


This project is being completed in several phases over two years to meet the owner’s schedule.

Early Phase:  Hardware removal and early assessment
September 2017

Phase 1: Dismantling, surface prep, systems removal, repairs, structural work
March 16, 2018 – November 16, 2018 (Discontinuous)
Phase 1 Hours:  341.75

Phase 2: Interior, systems, and more
January 23, 2019 – June 21, 2019
Phase 2 Hours:  651.25

Phase 3:  Electrical, electric motor, plumbing,  final exterior finishing, and everything else
October 18, 2019 – (Ongoing)

Scope of Project:  Comprehensive refit, including deck repairs, repower, interior makeover, hull work, and systems

Initial Pre-Project Inspection Report and Observations

Begin Daily Project Logs

Alternately, click the button below to navigate to a specific log.

February 6, 2019

Scupper 74


I spent much of the day on planning and administration as I sorted out various discussions we’d had during our meeting the day before, researched some materials options, but after a few hours of that I did get up to the boat for some “real” work, including another fairly quick round of sanding on the interior patchwork as required, bringing these areas pretty much to their final level of preparation.  With a few minor changes coming for the interior, there’d be more prepwork on other areas soon to come, though.

I continued work on the rudder as well, lightly sanding the main application of fiberglass over the bottom edge to prepare it for the final layers of fiberglass to encapsulate the corners and tie together all parts of the repair, which I finished up next.

Later, I finished rough-measuring for interior trim and other new materials required, the first step towards calculating what I’d need to order in order to continue the interior work.

Total time billed on this job today:  8 hours

0600 Weather Observation:  20°, clear.  Forecast for the day:  Sunny, 32°