Scupper 170


Scupper, a 1978 Legnos Mystic 30' Cutter


This project is being completed in several phases over two years to meet the owner’s schedule.

Early Phase:  Hardware removal and early assessment
September 2017

Phase 1: Dismantling, surface prep, systems removal, repairs, structural work
March 16, 2018 – November 16, 2018 (Discontinuous)
Phase 1 Hours:  341.75

Phase 2: Interior, systems, and more
January 23, 2019 – June 21, 2019
Phase 2 Hours:  651.25

Phase 3:  Electrical, electric motor, plumbing,  final exterior finishing, and everything else
October 18, 2019 – (Ongoing)

Scope of Project:  Comprehensive refit, including deck repairs, repower, interior makeover, hull work, and systems

Initial Pre-Project Inspection Report and Observations

Begin Daily Project Logs

Alternately, click the button below to navigate to a specific log.

October 30, 2019

Scupper 170


Over the course of several elapsed hours, I applied three coats of epoxy-based finish primer to all deck areas, beginning with the inboard areas of the coachroof, cockpit, and companionway.  Once I had three coats on those sections, I removed the paper I’d had in place to walk upon, then sprayed the three coats on the remaining areas to complete the job.

Total time billed on this job today:  6 hours

0600 Weather Observation:  51°, cloudy and fog/drizzle . Forecast for the day:  Drizzle and patchy fog, cloudy, 60°