Sea Breeze (FKA Scupper), a 1978 Legnos Mystic 30' Cutter
This project was completed in several phases over two years to meet the owner’s schedule.
Initial Pre-Project Inspection Report and Observations
Early Phase: Hardware removal and early assessment
September 2017
Early Phase Hours: 26.75
Phase 1: Dismantling, surface prep, systems removal, repairs, structural work
March 16, 2018 – November 16, 2018 (Discontinuous)
Phase 1 Hours: 315
Phase 2: Interior, systems, and more
January 23, 2019 – June 21, 2019
Phase 2 Hours: 665.5
Phase 3: Electrical, electric motor, plumbing, final exterior finishing, and everything else
October 18, 2019 – March 27, 2020
Phase 3 Hours: 683.75
Scope of Project: Comprehensive refit, including deck repairs, repower, interior makeover, hull work, and systems
Project Complete: 1691 Total Hours
Begin Daily Project Logs
Alternately, click the button below to navigate to a specific log.
Tuesday
After final preparations, I applied three coats of Alexseal snow white topcoat to the hull.
Total time billed on this job today: 3.75 hours
0600 Weather Observation: 28°, cloudy, about an inch of snow, sleet, and frozen rain down overnight. Forecast for the day: Cloudy, freezing drizzle, snow, and general unpleasantness, 37°