Holby 48

Boat:

Holby Pilot 19

Schedule:

Project Schedule: April 2022- (Ongoing)

Project Scope: Remove jet drive and engine and reconfigure for traditional outboard installation; paint hull; sundry related projects TBD

Begin Daily Project Logs

November 7, 2022

Holby 48

Monday

I spent the first part of the day working on some fine-tuning and sanding in some of the toughest spots, the inside corners of the new work around the outboard well.  I’d mainly sanded these during my last session, but several places required some additional work to complete.  Afterwards, I vacuumed the boat, swept the floor, blew down the shop, and solvent-washed the deck and hull to remove the final dust.

I wet down the floor and trailer to settle the remaining dust, then finished up other final steps to prepare for finish primer, including some minor tape repairs here and there, preparing paint and spray equipment, and, finally, a last solvent-wash to clean all the surfaces before primer next time.

Total time billed on this job today: 5 hours

0600 Weather Observation: 0600 Weather Observation: 62°, mainly cloudy, dew point 59°. Forecast for the day: Chance of showers, then gradual clearing, 73°