November 5, 2015
I started by vacuuming and solvent-washing the decks and hull, cleaning these surfaces to prepare for the next step. Afterwards, I went around the boat closely and marked various pinholes and other areas requiring additional attention, then applied fine epoxy filler to these areas. On this boat, these areas were pretty minimal.
Afterwards, there was little else I could to to advance this project, so I worked on other things during the remainder of the day.
Total time billed on this job today: 2.5 hours
0600 Weather Report:
Foggy, around 40°. Forecast for the day: Becoming sunny, around 60.