February 9, 2022

Lyra Phase 2-32

Wednesday

Before starting on the finish primer for the hull, I had to remove the masking from the hull/deck joint, which protected the hull from overspray during the deck primer application, then move the staging down  a couple feet for better access to the hull.  Then, I had to do the final solvent-wash to the hull using the paint system’s proprietary solvent for this use, and tack off thereafter.

With these and the usual other preparations complete, I applied four coats of dark gray epoxy primer to the hull over the next several elapsed hours.

Total time billed on this job today:  5.25 hours

0600 Weather Observation:  29°, clear.  Forecast for the day:  Sunny, 38°