December 22, 2015
Once more, I sanded the transom repair as needed, eventually ending with hand and machine sanding with 120 grit to tie this area in with the rest of the hull. I touched up a few other areas by hand as well, completing the basic hull prep.
Afterwards, I cleaned up the shop, blowing off the walls and other surfaces, vacuuming, sweeping, and washing the floor. Just a little final prepwork lay between me and high-build primer.
Total time billed on this job today: 1 hour
0600 Weather Report:
25°, cloudy. Forecast for the day: clouds, rain late in the day. High 44°