March 20, 2016
The adhesive securing the new pilothouse panel had cured to the point that I could remove the clamps and continue work.
Next, I reinstalled two pieces of the original corner trim, solid teak that I’d sanded back to bare wood. I still needed to bung the screw holes. With the trim back in place, I resecured the vinyl trim along the top edge, then applied a quick sealer coat of varnish to the new panel and trim, bringing it to the same state as the remaining interior woodwork.
Total time billed on this job today: .75 hours
0600 Weather Observation:
15°, clear. Forecast for the day: Sunny, high about 35°