110 Cookson Lane | Whitefield, ME 04353 | 207-232-7600 | tim@lackeysailing.com
After briefly sanding yesterday's filler, I spent the remainder of the day working on the brightwork, beginning by stripping the finish from remaining wood (companionway, coamings, etc.), using a heat gun and scraper. In some places, the old finish was extremely thick, years and years of varnish and Cetol, and came off like partially-cured rubber cement.
With the finish all stripped, I had enough time to get a start on sanding, working through the grits up to 220 on the companionway, small cockpit trim (instrument panel and tiller surround), heater vent pipe, and part of one coaming.
Total Time on This Job Today: 7.5 hours
