110 Cookson Lane | Whitefield, ME  04353 | 207-232-7600 |  tim@lackeysailing.com

Snow Lily | Thursday, October 18, 2012

Call me "Trimmy Tim".  I spent the day milling and installing various bits of trim around the main cabin, beginning with some narrow trim at the aft end of the passageway, to finish off the edges of the beadboard paneling.  On the starboard side, this trim also hid the seam between two plywood panels beneath.


    


Next, I milled, sanded, and installed the fiddles for the two settee shelves, along with an additional piece of trim to cover a corner seam and plywood seam in the starboard settee back.

    

Continuing, I milled and installed fiddles at the edges of the settee berths.

    

To wrap up the day's work, I installed several sections of corner trim (quarter round molding) as needed.  Some of these sections were cut from lengths of trim that I'd previously varnished, while others were raw cherry.

    
 


Total Time on This Job Today:  7 hours

<Previous | Next>