110 Cookson Lane | Whitefield, ME 04353 | 207-232-7600 | tim@lackeysailing.com
Continuing work on the hull-deck joint, I sanded the application of fairing filler from the other day, using longboard and sander as needed. Overall, the joint was looking good, particularly on the deck side.
Afterwards, I applied a third round of filler as needed--mostly spot-filling to take care of some low spots in the hull-deck joint, cockpit, and port openings.
The staging was at the wrong height for productive work on the hull side of the joint, and I'd found it a poor platform for working effectively on the hull at this time, so I decided leave most further work there for a bit later, when I could move the staging down for other hull preparations.
Total Time on This Job Today: 3.25 hours
