|Iota Refit |
Wednesday, March 12, 2008
Again today, I began and ended the day with the new woodwork: I sanded the pieces in the morning, and applied a third coat of varnish at the end of the day.
In between, I once again concentrated on deck hardware, this time on the after half of the boat. I began with the stern pulpit, which I knew would be a bear to install since access to the after sets of bolts was at about the limits of my reach inside the lazarette.
Afterwards, I continued with the various stern and cockpit cleats, stern chocks, blower and intake vents, winch pads, coachroof padeyes, and grab rails.