110 Cookson Lane | Whitefield, ME 04353 | 207-232-7600 | tim@lackeysailing.com
I spent the first part of the day sanding the decks all over, using 320 grit paper.
Afterwards, I cleaned up the boat and shop to remove sanding dust and prepare the decks for masking. Once the cleaning was complete, I began to lay out and mask off the eventual nonskid areas, so that I could spray the gloss topcoats on the remaining (exposed) areas. I temporarily placed the cockpit locker hatches in position so I could mask them in line with the adjacent seating areas, though I wouldn't leave them in place for the painting.
I'd finish up the sidedecks and foredeck, and make other final painting preparations, in the morning.
Total Time on This Job Today: 7.5 hours
