110 Cookson Lane | Whitefield, ME 04353 | 207-232-7600 | tim@lackeysailing.com
I finished up sanding the lower section of the starboard hull, then cleaned up the shop a bit from the week's sanding.
After taking advantage of the remains of the morning and finally stowing away the remainder of the miscellaneous gear, trim, and woodwork that I'd removed from the boat earlier, I gave the still-soaking bilge a scrub to loosen whatever might have loosened and pulled the drain plug to allow this round of water (and whatever else) to drain out and let me reassess the bilges next week, once the debris dried again.
I'd continue the bulk sanding and paint removal/surface prep process next week, once new staging was set up.
Total Time on This Job Today: 4.25 hours
