110 Cookson Lane | Whitefield, ME 04353 | 207-232-7600 | tim@lackeysailing.com
Snow Lily | Monday, December 3, 2012
To begin, I sanded the fresh hull primer using 320 grit by machine and hand. With the sanding complete, I cleaned up the hull and shop as needed to prepare for the next steps.
Next, I struck a new line on the hull to demark the top edge of the boottop, or the bottom edge of the hull paint. With the hull still level, I struck this line the same way I'd done the waterline some months earlier, choosing a visual height of three inches for the boottop.
Afterwards, I masked off the area beneath the new line; I'd paint the boottop separately when the hull was done. Then, I made final preparations, including final solvent wash and other cleaning, and preparing materials and spray equipment.
Total Time on This Job Today: 8 hours
