Kaholee Refit | November 3, 2007

I began with the exhaustive task of applying the three new labels I'd ordered from Blue Sea to the 12-volt electrical panel.  Two spare circuit breakers remain for future expansion on the 12-volt side.

Next, I sanded and cleaned the primer coat on the new head panel, and then applied coat #1 of the same white semi-gloss enamel used throughout the interior.

I installed the stern cleats, breast cleats, and two pair of bronze padeyes for jacklines, using the prepared holes and backing plates from yesterday.  I left the excess sealant squeezeout to cure for easier cleanup later.



Total Time on This Job Today: 3.5 hours

<Previous | Next>