| Circe
| Friday, April 16, 2010 I wrapped up a few loose ends and small projects. The little cover hatch for the table leg receptacle had cured overnight, so after testing the fit once more, I sanded the surface smooth to prepare it for varnish buildup. The first photo shows the initial fitting before any sanding. |
|
|
|
I continued the installation of the teak strip boarding pads. Through the new epoxy plugs I installed yesterday, I drilled and tapped for the fasteners, then secured the strips with sealant and machine screws. They'd be removable for future repainting efforts. |
 |
|
Finally, I laid out and installed hardware for a set of my retractable lazy jacks: a pair of cheek blocks on the mast above the spreaders; four strap eyes on the boom; a cleat on the front of the mast; and a few small turning blocks for the 1/4" line. |
 |
|
|
|
