110 Cookson Lane | Whitefield, ME 04353 | 207-232-7600 | tim@lackeysailing.com
Getting started, I washed and lightly sanded the epoxy-coated back sides of the cherry plywood panels, preparing them for installation. Meantime, I sanded the areas on the overhead where I'd applied filler to old fastener holes and the like.
After cleaning up and other final preparations, I began installation of some of the new bulkhead panels, starting with the chainlocker. I used polyurethane adhesive to secure the veneer panel to the existing bulkhead and clamps to hold it while the adhesive cured.
Continuing aft, I installed the two lower panels on the v-berth platform, clamping them securely in place.
With an off-site appointment during the afternoon, this wrapped up the day's work.
Total Time on This Job Today: 4 hours
